Home > Exhibition > Content

Briefly on the maintenance knowledge of the welding ring outlet mold kit for processing the welding ring

Oct 11, 2017

First of all, on the processing of welding ring outlet mold kit equipment in the work of the time, in particular, need to pay attention to, in fact, it should be in the implementation of processing welding ring outlet mold kit internal equipment or external The terminal to check the time, it is in a very large extent, it should be to turn off the power switch before they can be implemented.


Speaking of the processing of welding ring outlet mold kit equipment maintenance, in terms of its first aspect, in fact, it is necessary to pay attention to be regular to do the relevant aspects of testing work. For example, in view of the processing of welding ring outlet mold kit equipment is not powered, we actually have to pay attention to observe the cooling fan above the rotation is not smooth.


Then, on the other side, in fact, we should pay attention to look at the processing of welding ring outlet mold kit equipment is not unusual vibration phenomenon, sound or smell occurred; followed, we actually have to pay attention to observation About the gas is not there will be leakage; of course, the connection of its wire and its insulation on the dressing is not loose or peeling phenomenon is to be observed.


In addition, on the other side, we actually have to pay attention to because the processing of welding ring die kit equipment is forced to air-cooled, it is in great extent, it will be easier to suck from the surrounding to the dust and Will be accumulated in the equipment.


It is precisely because of this, for the processing of welding ring outlet mold kit equipment, in terms of its extent, it should be noted that it is necessary to regularly use clean and dry compressed air to put the equipment directly The inside of the dust is wiped off. Especially for its transformers, reactors and coil coil gap between the gap and power semiconductors and other parts of the fact that should be to be carried out in particular clean.


Yixing red light mould factory
Add:No.1180,Chuan Bu Village, the town of Ding Shu,Yixing, Jiangsu Province
Contact us: Fan huan
Mobile:86-13915380883
Tel:86-510-87491196
Fax:86-510-87495896
E-mail:sales@yxhgmj.com
Website:http://www.yxhgmould.com