Ceramic powder molding mold in the production process need to pay attention to its many factors, in the operation must be in accordance with the production of its ceramic products carefully purchase and use of gypsum, if you want to produce mechanism products, we must buy and use high strength gypsum , If it is the production of high-grade ceramic products of the original type of tire, it is necessary to use some of the more expensive high-quality gypsum and so on.
Ceramic powder molding mold in the production of gypsum plaster when the original cast of gypsum slurry, it should be effective to take its vacuum mixing method, so that you can to some extent effectively avoid the gypsum slurry left too much bubbles, affecting the rotation of the original The quality of the tire.
Ceramic powder molding mold in the deployment of gypsum in the process should be effective in the use of clean water, the water and gypsum deployment ratio should be adjusted according to the use of rotation of fetal water and gypsum ratio of 1: 1.3, Product water and gypsum ratio of 1: 1.4: 1.6 range.
Ceramic powder molding mold in the deployment of gypsum slurry, the operation of the process, the need for effective according to their requirements to the container inside the water, and then effectively in accordance with its proportion to catch the cream, until the gypsum powder into all After the water, and then use the tool to stir until you can even use the mixing.
Ceramic powder molding mold in the production of fetal type, it should be effective according to the size of its design drawings in the wheel on the rotation, and then hand-made in the production process of its square and other heterosexual objects, we must pay attention to the corner Sharpness.
Yixing red light mould factory
Add:No.1180,Chuan Bu Village, the town of Ding Shu,Yixing, Jiangsu Province
Contact us: Fan huan