Home > Exhibition > Content

Dry pressure bullet-proof die size requirements and the choice of locking screws and thickness

Dec 18, 2017

Dry-pressed bullet-proof sheet of the composition of the mold will be effective depending on the type of mold,There are two types of conformal configuration and reverse configuration in use.The former is the most commonly used structure,The latter structure is mainly used for drawing forming dies or special dies.

Dry pressing bullet-proof mold specifications

1. Die size and locking screws: Dry-pressing bullet-proof mold plate size  should be effective large than its work area to a certain extent, In the use of will choose a standard template size, the template will lock the screw position and the type of mold configuration and mold size.

2. Dry-pressing bullet-proof sheet Die in the single-use engineering most commonly used locking screw configuration in the four corners, the most standard forms of work area can be widely used.Long shape of the mold and continuous mold most commonly used locking screws arranged in the four corners and the middle position.

Dry-pressing bullet-proof mold thickness

Dry pressing bullet-proof sheet in the choice of the thickness of the mold and die structure, stamping processing force, the type of stamping and stamping accuracy and other absolute relationship,In the process of using the calculation based on theoretical calculations to determine the thickness of the mold is more difficult, generally obtained by the experience, the design template thickness should be used as little as possible, with the mold height and clamping height to be standardized to facilitate procurement and inventory management.