Home > Exhibition > Content

Textile ceramic mold Role and application

Mar 15, 2019

Textile ceramic mold Role and application

 

Today, molds are becoming more and more widely used. Only by knowing more about molds can we reduce costs and increase production efficiency. In some textile equipment, where wear and insulation are required and the amount is relatively large, structural parts ceramics are used, and the mold for forming such structural parts is called high-precision textile ceramic mold.

 

The  textile ceramic mold adopts powder molding and has relatively high hardness. The mold is divided into upper mold, lower mold and concave mold, and some perforated products may require a core rod. In order to improve the service life and the consistency of the product, the working part of the die and the mandrel should be made of tungsten steel as much as possible. The shape of the upper and lower molds is simple to produce a product with a large output. Tungsten steel can also be used. If the shape is too complicated, especially at the end face of the mold. Complex, try to use mold steel to facilitate processing.

 

According to different products, the  textile ceramic mold  pressing density will be different. Most of the small products are solid small round wafers. There are more 20-station rotary presses. Pay attention to the gap when making, if the gap is not suitable. Will cause stratification, lack of angle.

https://www.yxhgmould.com/